EarthPulse Pro V6 Sleep-on-Command

S$0.00

EarthPulse™ v6 Pro is the most versatile and top of range configuration from EarthPulse. It comes with two electromagnetic cores that you can either share with your partner during sleep or apply them to different parts of the body at the same time. Order the product directly from EarthPulse through our affiliated link to enjoy the best deal and local support.

Description

EarthPulse™Pro V6 Sleep on Command™ PEMF System

EarthPulse™ v6 Pro; our two magnet system. The most powerful PEMF system under US$1,500. EarthPulse Pro offers better than 2x the full-body coverage than our single magnet system and tons more power for local application when required.


The EarthPulse™ v6 Pro Sleep on Command™ System includes:

  • One v6Pro  Controller (two output jacks)
  • Two Electromagnets
  • One 100-240 volt AC to 12 volt DC Power Supply that will reduce EMF and RF picked up from your building
  • 4 pin adapters for all regions
  • One v6 Pro padded, clear-side travel case

Designed to provide twice the full-body coverage as our standard v.6 system. This device is strong enough to split each channel into a total of 4 magnets to work as good as a  v6 ProPlus.

With the addition of an external battery and our transportable pack-system, it is the first fully portable, full-power pulsed magnetic system for when you need it.

Includes features:

  • Software controlled amplitude; from 10% – 100% to help acclimation for EMF sensitive people;
  • 10 Algorithmic Programs including the Manual-Frequency Mode for choosing one frequency for up to 12 hours;
  • Addition of 1-hour buffer at 14.4 Hz on all Sleep-Modes, Recover and Manual-Mode to help you wake more effectively without sleeping through shut-down;
  • L-shaped cable tips for easier transportability and longer plug life.
  • 2 x 1100 Gauss nano-second peak magnetic field intensity

EarthPulse Pro PEMF system

10 Algorithmic Programs: Frequency range under 14.4 Hz

  1. RECOVER-MODE – Up to 12 hours 9.6 Hz with wake up phase and 1 extra hour Alert 14.4 Hz buffer whether set for 8 hour or 12 hours. Perfect for power naps;
  2. SLEEPEZ – 9.6 Hz for 10 Minutes (when set for 8 hours) then stepping down to 3 Hz in 60 seconds then stepping down further to 1 Hz over course of during following 15 Hz – back up to 3 Hz for total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer;
  3. SLEEP-MODE 1   9.6 Hz stepping down to 1 Hz over 45 minutes (when set for 8 hours) then back to 5 Hz stepping down to 1 Hz – back to 5 Hz for total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer to nag user to wake;
  4. SLEEP-MODE 2   9.6 Hz stepping down to 1 Hz over course of 45 minutes (when set for 8 hours) then stepping back up to 3 Hz / down to 1 Hz / back to 3 Hz for total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer;
  5. SLEEP-MODE 3 – 3 Hz stepping down to 1 Hz back to 3 Hz for a total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer;
  6. SLEEP-MODE 4 – 1 Hz start to finish; plus 1 hour 14.4 Hz wake up phase;
  7. ALERT-MODE – 12 Hz to 14.4 Hz back down to 12 Hz for up to 12 hours (our choice as an interruptive field for EMF protection during waking hours);
  8. MANUAL-FREQUENCY-MODE – Set for 1/2 Hz – 14.4 Hz for up to 12 hours with an additional 1 hour 14.4 Hz buffer to help you wake when used for sleep;
  9. ENTRAINMENT-UP – 9.6 Hz to 1/2 Hz back up to 14.4 Hz in 30 minutes or 1 hour then shuts off;
  10. ENTRAINMENT-DOWN – 9.6 Hz to 1/2 Hz and shutting down. 1 hour setting only.

 

Learn more about EarthPulse technology

 

You may also like…