EarthPulse™ (Standard) V6 Sleep on Command™ PEMF System
EarthPulse™ v6 Sleep on Command PEMF system is the de-facto model for general purpose application. To is no model name attached to it as the rest, hence we are using “standard” for clearer naming reference. It delivers 1100 Gauss peak amplitude in Local Application Mode and 650 Gauss across the square wave with Sleep-Configured Electromagnet (outer ring removed). More effective with thick mattress and where more field amplitude is required for local application.
- 10 Algorithmic Program Modes including Manual Mode (as in Basic Model).
- v6 is powered by 100v – 240v compatible 12 volt DC power supply that will reduce EMF and RF picked up from your building.
- Travels easily inside carry-on baggage at just 1Kg.
The EarthPulse™ v6 Sleep on Command™ System includes:
- One EarthPulse v6 Controller (one output jack)
- One Electromagnet
- One 100-240 volt AC to 12 volt DC Power Supply that will reduce EMF and RF picked up from your building
- 4 pin adapters for all regions
- One padded, clear-side travel case
You can also add an extra magnet (and included splitter cable) and have a 30% lower amplitude as compared to v.5 Pro model.
- Software controlled amplitude; from 10% – 100% to help acclimation for EMF sensitive people;
- 10 Algorithmic Programs including the Manual-Frequency Mode for choosing one frequency for up to 12 hours;
- Addition of 1-hour buffer at 14.4 Hz to help you wake more effectively without sleeping through shut-down;
- L-shaped cable tips for easier transportability and longer plug life.
- 1100 Gauss nano-second peak magnetic field intensity
10 Algorithmic Programs: Frequency range under 14.4 Hz
- RECOVER-MODE – Up to 12 hours 9.6 Hz with wake up phase and 1 extra hour Alert 14.4 Hz buffer whether set for 8 hour or 12 hours. Perfect for power naps;
- SLEEPEZ – 9.6 Hz for 10 Minutes (when set for 8 hours) then stepping down to 3 Hz in 60 seconds then stepping down further to 1 Hz over course of during following 15 Hz – back up to 3 Hz for total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer;
- SLEEP-MODE 1 – 9.6 Hz stepping down to 1 Hz over 45 minutes (when set for 8 hours) then back to 5 Hz stepping down to 1 Hz – back to 5 Hz for total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer to nag user to wake;
- SLEEP-MODE 2 – 9.6 Hz stepping down to 1 Hz over course of 45 minutes (when set for 8 hours) then stepping back up to 3 Hz / down to 1 Hz / back to 3 Hz for total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer;
- SLEEP-MODE 3 – 3 Hz stepping down to 1 Hz back to 3 Hz for a total of 4 cycles then wake up phase and 1 hour 14.4 Hz buffer;
- SLEEP-MODE 4 – 1 Hz start to finish; plus 1 hour 14.4 Hz wake up phase;
- ALERT-MODE – 12 Hz to 14.4 Hz back down to 12 Hz for up to 12 hours (our choice as an interruptive field for EMF protection during waking hours);
- MANUAL-FREQUENCY-MODE – Set for 1/2 Hz – 14.4 Hz for up to 12 hours w/additional 1 hour 14.4 Hz buffer to help you wake when used for sleep;
- ENTRAINMENT-UP – 9.6 Hz to 1/2 Hz back up to 14.4 Hz in 30 minutes or 1 hour then shuts off;
- ENTRAINMENT-DOWN – 9.6 Hz to 1/2 Hz and shutting down. 1 hour setting only.
Learn more about EarthPulse Technology