SOTA Magnetic Pulser (MP7)

SOTA Magnetic Pulser uses pulsed magnetic fields to create microcurrents of electricity that work with the body’s own electricity to promote health.

What the Magnetic Pulser does

As we understand it, here is how it works: The Magnetic Pulser is designed to deliver localized pulsed magnetic fields. In turn, these fields create temporary microcurrents of electricity in the area of focus. Microcurrents work with the body’s natural electricity to improve health & wellbeing.

Wellness Lifestyles are holistic ways to live a healthy life and support abundant health. Holistic or wellness approaches view the body from many angles, including: mechanical, chemical, mental, emotional, energetic, spiritual, as well as electrical.

All living things possess an electrical nature. SOTA Products work with the body’s natural electricity or energy, contributing to wellness. Similar to how exercise, eating right, getting enough sleep, and meditating nourish the body and contribute to good health

Key Features:

• Automatic Timer
• Bio-North Pole identified
• Fast (approx. 2,500 Gauss) and Regular – high-intensity mode (over 7,000 Gauss)
• Magnetic Field penetrates up to 35cm (14 inches)
• 2 years international warranty, 1-year local warranty
• Power Adapter UK Plug type only

Difference Between Modes:

• The Regular Mode has a higher Gauss output (>7000 Gauss) and is measurable to 14” (approx. 35cm). The benefit of the Regular Mode is the strength and depth of the field generated. The trade-off is it takes approximately 5 seconds for each pulse to be delivered.
• The Fast Mode has a lower Gauss output (2500 Gauss) and is measurable to 7” (approx. 17-18cm). This Mode is best used when not needing a stronger and deeper field. The benefit of the Fast Mode is the pulses are delivered very quickly, approximately every second. The trade-off is the intensity of each pulse is less.

In summary, Regular Mode = high Gauss every 5 seconds and Fast Mode = lower Gauss every second.

SOTA Magnetic Pulser is easy to use. Simply power on, and place the paddle to the body. You may choose between Fast and Regular mode during the operation

Using SOTA Magnetic Pulser is easy. Put the paddle on the body with the “N” marking facing the application area. While the operation is going on, you can choose between Fast and Regular mode.

View the videos below to further understand the application and technology of SOTA MP7. The video below is based on MP6. The instructions for using the Models MP7 and MP6 are the same with the following exceptions:

ELECTRICAL SPECIFICATIONS
Your Magnetic Pulser outputs a time-variant pulsed DC magnetic field.

POWER REQUIREMENTS
12 Volts DC @ 1.5 Amps, Tip or Center Positive.
Caution: Exceeding the voltage rating or reverse connection may result in injury or unit failure. This will void the warranty.

OPTIONAL POWER INPUT
To operate the Magnetic Pulser from a 12 Volt DC source, such as an automobile
battery or an appropriate Solar Panel, purchase a Universal Power Cord with Tip or
Center Positive.

REGULAR MODE – OUTPUT SPECIFICATIONS
Magnetic Field Intensity: Greater than 7000 Gauss at face of the Hand Paddle as tested with an F.W.Bell 5080 Tesla Meter.
Pulse Duration: ~2.5 mS (milliseconds).
Pulses per Cycle: 255 pulses (approx. 20 minutes).

FAST MODE – OUTPUT SPECIFICATIONS
Magnetic Field Intensity: Greater than 2500 Gauss at face of the Hand Paddle as tested with an F.W.Bell 5080 Tesla Meter.
Pulse Duration: ~2.5 mS (milliseconds).
Pulses per Cycle: 1400 pulses (approx. 20 minutes)